Gilbert® LED EXIT™ System TEN™
(Dot Matrix Type Display)
system10.gif

PLACE UP TO 10 REMOTES 500' FROM MASTER

Hide Master Control Box in a closet.
Install up to ten Remote EXITs anywhere within 500'


  • Long-life, Vibration-Resistant LED Light Source
  • 1.4 Watts per EXIT with Ten Remotes Connected
  • Amazing ROI / Life Cycle Cost
  • Emergency Operating Time - 4 Hours
  • Complete Recharge - 12 Hours
  • Remotes U.L. Listed "Suitable for Damp Locations
  • U.L. Listed to -30 degrees C. to 65 degrees C.

 SYSTEM TENTM FEATURES:

  • Designed Longevity Throughout
  • Voltage/Current Regulation Circuitry to Protect Dispay LEDs
  • Conformal Coated Electronics
  • FR4 (Glass Epoxy) Circuit Board provides superior strength & temperature expansion rate closer to that of circuit tracings
  • Surge & Short Circuit Protection Circuitry
  • Vandal Resistant / Metal Reinforced Polycarbonate Shields
  • Vinyl Coated Marine Grade 5052-H32 Aluminum Finish
  • Ease of Installation / Dual Input 120/277v, 60 hz. Transformer
  • Low Voltage Wiring to Thin, Attractive Remotes
  • Universal Mounting (Canopy included with each Remote)
  • Knockout Chevron Arrows
  • Brightness/Visibility Exceeds NFPA / UL Standards

BATTERY-BACKUP FEATURES:

  • BB® Sealed Lead-Acid Battery Standard
  • Low Voltage Disconnect / Brownout Protection
  • Field-Selectable Flashing / Non-Flashing Emergency Mode
  • Diagnostic Indicator LEDs
  • Push to Test Button / 5 minute Flash for Remote Inspection

Energy Use (w/ Battery Backup)

  • 1.44 Watts per EXIT with 10 Remotes Connected
  • 1.57 Watts per EXIT with 9 Remotes Connected
  • 1.62 Watts per EXIT with 8 Remotes Connected
  • 1.82 Watts per EXIT with 7 Remotes Connected
  • 1.91 Watts per EXIT with 6 Remotes Connected
  • 2.26 Watts per EXIT with 5 Remotes Connected
  • 2.50 Watts per EXIT with 4 Remotes Connected
  • 3.26 Watts per EXIT with 3 Remotes Connected
  • 4.25 Watts per EXIT with 2 Remotes Connected
  • 8.40 Watts per EXIT with 1 Remote Connected

Energy Use (w/ AC Only)

  • 1.33 Watts per EXIT with 10 Remotes Connected
  • 1.45 Watts per EXIT with 9 Remotes Connected
  • 1.47 Watts per EXIT with 8 Remotes Connected
  • 1.67 Watts per EXIT with 7 Remotes Connected
  • 1.71 Watts per EXIT with 6 Remotes Connected
  • 2.04 Watts per EXIT with 5 Remotes Connected
  • 2.17 Watts per EXIT with 4 Remotes Connected
  • 2.86 Watts per EXIT with 3 Remotes Connected
  • 3.60 Watts per EXIT with 2 Remotes Connected
  • 7.10 Watts per EXIT with 1 Remote Connected

CODES AND STANDARDS:

  • UL Listed / UL 924
  • Meets NFPA-101 LIFE Safety Code, OSHA, & NEC

Gilbert® REMOTE EXITs Order Instructions

  • Single-faced - Order # LED-R1-XXX-12V Basic AC Only: Order #LED-S10-AC-12V

Master unit powers up to 10 Remote EXITs up to 500 ft. away.

For Fire Alarm Interface: Add "-FAI" to the end of model number
Dimensions: 16" x 6-3/4" x 3-1/4" (406mm x 171mm x 82mm)

Gilbert® REMOTE EXITs

  • Single-faced - Order # LED-R1-XXX-12V
  • Double-faced - Order # LED-R2-XXX-12V

Replace each "X" with color choice:

EXIT Letters: Red (R) or Green (G)
Housing: White (W) or Black (B)
Faceplate: White (W), Black (B), or Brushed Aluminum (A)

SPECIAL Housing & Faceplate:

Polished Brass (Replace Last XX with: TT)
For Antique Brass (Replace Last XX with: ZZ)

GilbertTM Remote EXIT Dimensions:
12-1/16" X 7-9/16 X 1-1/8" (306mm X 192mm X 29mm) Wt. = 2.6 lbs (1.18kilo)
Double-faced Depth 1-11/16" (42mm) Wt. = 3.2 lbs (1.45 kilo)

PRODUCT INFO

Gilbert® Solid-Letter LED Exits™
(i.e. "Cavity-Lit" or "Stencil" Type)
 
Gilbert® Dot-Matrix LED Exits™
(i.e. "Direct-View" Type)
 
The Reliability Revolution

Emergency Lighting Unit Equipment
 
ORDERING INSTRUCTIONS

Exit Home Home | Home | Gilbert Home

Gilbert Industries, Inc. 5611 Krueger Drive, Jonesboro, AR 72401
TOLL FREE: (800) 643-0400 PHONE: (870) 932-6070 FAX: (870) 932-5609
E-MAIL: mailbox@gilbertinc.com
Site Created: August 1996 Copyright© 1996-Today, Gilbert Industries, Inc.