Gilbert® LED EXITTM
Hazardous Locations System TenTM
(Dot Matrix Type Display)

[explosion proof units]
(PLACE UP TO TEN REMOTES 500' INTO HAZARDOUS LOCATION AREAS)
U.L. LISTED FOR Class I, Division 1& 2 (Group A, B, C & D)
and Class II, Division 1& 2 (Group E, F & G) HAZARDOUS LOCATION AREAS

$ave Money And Maintenance

  • Long-life, Vibration-Resistant LED Light Source
  • 1.4 Watts per EXIT with Ten Remotes Connected
  • Amazing ROI / Life Cycle Cost
  • Emergency Operating Time - 8 Hours
  • Complete Recharge - 12 Hours

HAZARDOUS LOCATIONS SYSTEM TENTM FEATURES:

  • Designed Longevity Throughout
  • Voltage/Current Regulation Circuitry to Protect Dispay LEDs
  • Conformal Coated Electronics
  • FR4 (Glass Epoxy) Circuit Board provides superior strength & temperature expansion rate closer to that of circuit tracings
  • Surge & Short Circuit Protection Circuitry
  • Vandal Resistant / Metal Reinforced Polycarbonate Shields
  • Vinyl Coated Marine Grade 5052-H32 Aluminum Finish
  • Ease of Installation / Dual Input 120/277v, 60 hz. Transformer
  • Low Voltage Wiring to Thin, Attractive Remotes
  • Universal Mounting (Canopy included with each Remote)
  • Knockout Chevron Arrows
  • Brightness/Visibility Exceeds NFPA / UL Standards
BATTERY-BACKUP FEATURES:
  • BB® Sealed Lead-Acid Battery Standard
  • Low Voltage Disconnect / Brownout Protection
  • Field Selectable Flashing or Non-Flashing Emergency Mode
  • Diagnostic Indicator LEDs
  • Push to Test Button / 5 minute Flash for Remote Inspection

ENERGY USE

  • 1.44 Watts per EXIT with 10 Remotes Connected
  • 1.57 Watts per EXIT with 9 Remotes Connected
  • 1.62 Watts per EXIT with 8 Remotes Connected
  • 1.82 Watts per EXIT with 7 Remotes Connected
  • 1.91 Watts per EXIT with 6 Remotes Connected
  • 2.26 Watts per EXIT with 5 Remotes Connected
  • 2.50 Watts per EXIT with 4 Remotes Connected
  • 3.26 Watts per EXIT with 3 Remotes Connected
  • 4.25 Watts per EXIT with 2 Remotes Connected
  • 8.40 Watts per EXIT with 1 Remote Connected

CODES AND STANDARDS:

  • UL Listed / UL 913
  • Meets NFPA-101 LIFE Safety Code, OSHA, & NEC

  UL HAZARDOUS LOCATIONS CERTIFICATIONS

CLASS I
DIVISION I:

Where ignitable concentrations
of flammable gasses, vapors or
liquids can exist all the time or
some of the time under normal
operating conditions.

CLASS I
GROUPS:

A (acetylene)
B (hydrogen)
C (ethylene)
D (propane)

CLASS I
DIVISION 2:

Where ignitable concentrations
of flammable gasses, vapors or
liquids are not likely to exist under
normal operating conditions.

CLASS II
DIVISION I:

Where ignitable concentrations
of combustible dust can exist all
the time or some of the time under
normal operating conditions.

CLASS II
GROUPS:

E (metals)
F (coal)
G (grain)

CLASS II
DIVISION 2:

Where ignitable concentrations of
combustible dusts are not likely to
exist under normal operating conditions.

ORDERING INSTRUCTIONS
Gilbert® Hazardous Locations TEN MASTERTM
  • Order #LED-S10-ISH-12V

Includes Battery-Backup. Charger & Powers up to 10 Hazardous Locations Remote EXIT Signs up to 500 ft. away. \ Master installed outside hazardous area. Place ONLY Hazardous Locations Remotes in hazardous area!

For Fire Alarm Interface: Add "-FAI" to end of above model number
Dimensions: 16-1/8" x 9-3/4" x 3-1/8" (410mm x 248mm x 79mm)

Gilbert® Hazardous Locations REMOTE EXITs

  • Single-faced Order# LED-X1-XX-ISH-12V
  • Double-faced Order# LED-X2-XX-ISH-12V

Replace each "X" with color choice:

EXIT Letters: Red (R) or Green (G)
Housing: White (W) or Black (B)
Faceplate: White (W), Black (B), or Brushed Aluminum (A)

SPECIAL Housing & Faceplate:

Polished Brass (Replace Last XX with TT)
For Antique Brass (Replace Last XX with ZZ)
PRODUCT INFO
Gilbert® Solid-Letter LED ExitsTM
(i.e. "Cavity-Lit" or "Stencil" Type)
 
Gilbert® Dot-Matrix LED ExitsTM
(i.e. "Direct-View" Type)
 
The Reliability Revolution

Emergency Lighting Unit Equipment
 
ORDERING INSTRUCTIONS

Exit Home Home | Home

Gilbert Home

Gilbert Industries, Inc. 5611 Krueger Drive, Jonesboro, AR 72401
TOLL FREE: (800) 643-0400 PHONE: (870) 932-6070 FAX: (870) 932-5609
E-MAIL: mailbox@gilbertinc.com
Site Created: August 1996 Copyright© 1996-Today, Gilbert Industries, Inc.